logo
专注油气领域
与独立思考者同行

巴基斯坦油气开发公司“钻井水龙头采购”招标

招标单位:Oil & Gas Development Company Limited (OGDCL)
招标编号:PROC-FB/CB/DRM-1813/2016

项目名称:水龙头采购,载荷:500吨
招标内容:
1. Swivel, Capacity 500 US ton, 5000 PSI WP C/W Integrated Pneumatic Kelly Spinner, Goose Neck Assy., Wash Pipe Assy., Packing Assy. Quantity: 1 NO.
2. Comprehensive Lot of two years recommended spares. Quantity: LOT.
3. A set of Part Catalogue maintenance & user manual (free of cost). Quantity: 1 NO.

技术规格:
1. Working Load Strength:                                                 500 US Tons
2. Working Pressure:                                                         5000 Psi
3. Radius Bail for Hook:                                                     4-1/2”
4. Hook Clearance:                                                            22”-27”
5. Maximum Speed:                                                          300 RPM
6. Wash Pipe Passage:                                                       3”
7. Gooseneck Thread, API Std.:                                          4”
8. Joint at Bottom Sleeve L.H. API Regular:                         7-5/8”
9. Coupling Connector to Kelly: API Regular L.H. PIN:         6-5/8”
10. API Certification for Swivel:                                          8C
11. Pneumatic Motor for Kelly Spinner:                              FMS 20
12. Rated Spinning Speed:                                                 90-92 R/Min
13. Motor Rated Speed:                                                     2800 R/Min
14. Motor Power:                                                              20 HP

投标截止日期:2016年8月18日10:30
开标时间:2016年8月18日11:00

Requirement Note:
1. The bidder will submit valid API-8C Certification on Swivel Specs, in the name of the OEM.
2. The bidder should provide his last 5 years sale record made in Oil Well Drilling Industry with complete references, address and contact numbers. Incomplete information in this connection will be rejected.
3. The bidder should provide one year warranty from date of installation or 18 months from date of shipment against miss fitness & bad performance at the time of use on relevant equipments.
4. In case the bidder and the manufacturer are different, then the bidder must provide an original Authority letter/ OEM certificate from the manufacturer with the technical bid.
5. During Technical/ Financial Evaluation any commitments, Revising Agreed between the indenter & Bidder will be the part of P.O.

未经允许,不得转载本站任何文章: